|
You can apply driver parameters for one HBA to other HBAs in the system
using the Driver Parameters tab. When you define parameters for an HBA,
you create a .dpv file. The .dpv file contains the parameters for that
HBA. After you create the .dpv file, HBAnyware enables you to apply the
.dpv file parameters to multiple HBAs in the system, thereby simplifying
multiple HBA configuration.
To create the .dpv file:
-
Start HBAnyware.
-
Select the HBA whose parameters you want to apply to other HBAs
from the discovery-tree.
-
Select the Driver Parameters tab. Set any driver parameters you
wish. Refer
to the Set Driver Parameters help topic for more information on setting
parameters.
-
After you define the parameters for the selected HBA, click Save
Settings. The Select Driver Parameter File dialog box appears. Use the
dialog box to to select where to save the file or to rename the file.
Click Save. The Save Driver Parameters dialog box appears.
-
The two radio buttons allow you to choose the type of parameters
to save. You can save all parameters or only those parameters whose current
values differ from their corresponding default values. A
list of the saved parameters and their current values is displayed in
Parameters to be saved box.
-
Click Save.
|
